Cleaning Chemicals

• We have many industrial cleaning chemicals available in different sizes. 
• These chemicals are made up of the best quality ingredients which makes them eminently useful for all kinds of industries that are required to be cleaned.

BENEFITS: AQL 50000 PLUS is specially formulated to inhibit the deposition of silica scale in cooling systems where the silica content of the feedwater is over 25ppm

DESCRIPTION: AQL 50000 PLUS is a primary scale and corrosion inhibitor. It is a liquid blend of phosphoric acid, polymers and a yellow metal corrosion inhibitor.
 
APPLICATIONS: Use AQL 50000 PLUS whenever the cooling tower feedwater contains 25 or more ppm of silica.  The initial dosage in the cooling water is 1 gallon of product for each 2,000 gallons of system capacity.  Continue this dosage for 7 days. The maintenance dosage is 1 gallon of product for each 6,000gallons of bleedoff to maintain 10-20ppm phosphonate in the system.  .

PRODUCT DOSAGE: Use AQL 50000 PLUS in cooling tower systems when the total ppm of si8lica in the tower water would exceed 150ppm.  The initial dosage in the cooling water is 1 gallon of product for each 2000 gallons of system capacity.  Maintain this initial concentration (30ppm phosphonate) for 7 days.  The maintain dosage is 1gallon of product for each 6000 gallons of bleedoff to maintain 1-20ppm phosphonate in the system.
 
METHOD OF FEED: AQL 50000 PLUS can be fed directly into the cooling tower sump, or directly into the recirculating waterline, with a midstream injection tip.  This product should not be mixed with biocides in chemical feed solutions.

SYSTEM OPERATING PARAMETERS:

• Featuring a unique multi-polymer formulation that prevents scale formation, AQL 30000 kt also contains dispersants and corrosion inhibitors

• AQL 30000 kt has application in large and medium sized refrigeration type recirculating cooling systems with extreme hardness and alkalinity
• Contents (stressed water). This product has application in high-temperature industrial process cooling systems

• Adds sufficient AQL 30000 kt to maintain 2-5 ppm of molybdenum as measured by low-range a molybdenum test kit
• Maintenance dosage: Add sufficient AQL 30000 kt to maintain 2-5 ppm of molybdenum using a low-range molybdenum test kit. Consult your aqua line water treatment consultant for further instructions

• AQL 30000 kt can be fed directly into the cooling tower sump or directly into the recirculating water line using a midstream injection tip. This product should not be mixed with bio cides in a chemical feed solution
• System operating parameters: Follow the parameters outlined for internal boiler water treatment
• Refrigeration cooling tower system
• Cooling water conductivity: 3500 micromhos (max)
• Total hardness: 900 ppm or
• Total alkalinity: 600 ppm
• Silica as sio₂ (theoretical) : 150 ppm
• High temperature industrial process
• Cooling water conductivity : 3500 micromhos (max)
• Total hardness : 700 ppm or
• Total alkalinity : 500 ppm
• Silica as sio₂ (theoretical): 150 ppm
• Product control parameters: add sufficient treatment to maintain 2-5 ppm molybdenum
• Physical properties:
• Appearance: amber
• Ph: 11.8
• Specific gravity : 1.130
• Density : 9.43 lbs. /gal.

• May cause skin or eye irritation
• May cause allergic respiratory reaction
• May cause irritation if inhaled
• May be harmful if swallowed
• Contains the potassium salt of tolyltriazole
• Avoid contact with skin, eyes and clothing
• Wear neoprene rubber or nitrile gloves, chemical goggles and protective clothing when handling
• Wash thoroughly after handling
• Keep the container closed when not in use
• Avoid breathing the mist
• Use sufficient ventilation to prevent a buildup of mist
• Swallowing may cause nausea, vomiting and diarrhea

• Wash affected areas with large amounts of soap and water for 15 minutes
• Remove contaminated clothing and shoes
• Get immediate medical attention
• Wash clothing and clean shoes before reuse

• Immediately rinse the eyes with water
• Remove any contact lenses
• Hold the eyelids apart to ensure rinsing of the entire surface of the eyes and lids with water
• Continue flushing for at least 15 minutes
• Get immediate medical attention

• Remove from the area to fresh air
• Seek medical attention if respiratory irritation develops or if breathing difficult

• Give 3 to 4 glasses of water, but do not induce vomiting
• If vomiting occurs, give fluids again. Get immediate medical attention if discomfort occurs