Kch India Private Limited

DESCRIPTION: TECHGEAR-320 WT are premium high performance fully synthetic gear oils specially developed for wind turbines and various types of enclosed industrial gears operating under normal to extremely heavy duty conditions. Formulated from water soluble PAO (PolyAlphaOlefin) /Ester based with high viscosity index synthetic base oil, extra anti-foam (silicon free defoamer) with ester additive and excellent load carrying capacity extreme pressure, anti-oxidant & anti-rust additives.TECHGEAR-320 WT oils provide clean-gear performance, excellent extreme pressure and micro-pitting protection, anti-wear, superior performance across wide temperature range, and provides energy saving opportunities with reduced bulk oil temperatures, smooth operation of the gear drives and up to 2x long lasting performance. PolyAlphaOlefin is 100% synthetic base oil which provides longer lubrication. APPLICATION  Recommended for the gearboxes in wind turbines of all sizes and capacities, especially for heavy loads and high shock loaded gear units, remotely located units and extreme high & low temperature environments.  It is especially recommended for wind turbines applications such as main gear motors for pitch and yaw drives that may be subject to Auxiliary gearboxes, micro pitting, gearbox rolling element bearings, especially heavily loaded gearboxes with surface-hardened tooth metallurgies at high and low speed.  TECHGEAR-320 WT is long life synthetic oils range for the lubrication of worm gears, Bevel Helical gears, Planetary gears, Helical gears, Power generation gear drives such as mills and heavily loaded gear drives.

DESCRIPTION A range of quality single grade transmission fluids designed to meet the requirements of Caterpillar TO-4, GM Allison C-4 and Komatsu Dresser applications in off highway construction and earthmoving equipment. Blended from quality base oils together with a specific additive system Transmission TO-4 Fluids ensure the advanced performance characteristics required to meet the test parameters of these up to date specifications. Improved frictional properties, Antiwear performance oxidation stability and Wet Brake performance offer the essentials for longer equipment life. PRODUCT PROFILE Allison C-4 (SAE 10, 30), Caterpillar: TO-4, Dresser, GM Detroit, Komatsu, ZF TE ML-03, ZF TE ML-01, Eaton and Dana (Spicer) Manual Transmissions & Tractors (SAE 30, 50, 80). APPLICATION Recommended in construction, quarrying machines, older light or heavy trucks, locomotives, and diesel stationary engines (energy production), Heavy duty monograde oils for diesel engines, hydraulics, steering systems and transmissions where monograde engine oils are specified.  Grade SAE 10W is used in hydraulic systems.  Grade SAE 30, 40 & 50 is used in power shift transmissions & gearboxes.  Grade SAE 80 is a UNIVERSAL TRACTOR TRANSMISSION (UTTO) 3 in 1 oil is specially designed for use where a common lubricant reservoir serves transmissions, final drives and hydraulic systems and to optimize the performance of agricultural and commercial tractors.  TQ-ATF D-III quality fluids, such as power steering systems and hydraulic applications where such type of fluids are Specified. BENEFITS  Balanced detergent-dispersant properties: Effective control of engine wear, varnish, deposits and sludge for cleaner engines.  High alkalinity reserve: Improve deposit control and protect against l acid residual attack induced by fuel combustion.  High viscosity retention and volatility control: Maintain consistent oil film strength for optimum power output and minimize oil consumption.  Outstanding anti-wear and anti-corrosion properties: Protect components against wear and extend equipment life.  Good thermal stability: Reduce oil degradation for longer oil life and lower maintenance cost.