Boiler Chemicals

This heavy-duty concentrated cleaner, rust remover, and degreaser are formulated in the USA, offering effective descaling for brass and copper tubes in boilers, condensers, heat exchangers, and cooling equipment. It efficiently cleans lime deposits, rust, scale, stains, mineral sediments, and scum. This versatile solution is suitable for various metal surfaces, including MS, Brass, and Copper.
Featuring a 100% bio-degradable formula following USA standards, this descaling chemical is ideal for use in boilers, generators, radiators, cooling towers, and more. It provides instant rust and corrosion removal, with a 1:4 economical dilution ratio.
The product boasts deep-penetrating action, eliminating the need for heavy agitation during cleaning. It reduces cleanup costs and offers easy application with dilution ratios of up to 1:10 parts with water. The formulation includes special wetting agents that dissolve tough carbonates holding deposits together.
Safe for end-users to handle, this chemical is suitable for a range of applications, including cleaning mixing trucks, heat exchanger equipment, condensers, brass and copper tubing, boilers, and masonry surfaces. It excels at removing excess concrete from new brickwork, mortar, lime scale, and mineral deposits in fountains.
The solution is also an excellent construction cleaner, effectively removing dirt from masonry, glaze tiles, stone, and concrete blocks. Harmless to most paints and finishes, it works like maintenance magic to clean buildings and machinery. Its application extends to descaling boilers, generators, radiators, air conditioning systems, and cooling towers without harming copper or MS tubes.
For stain marks in toilets, direct use is recommended. When descaling boilers, condensers, or cooling towers, a 1:10 dilution with water is effective. For cement dropping cleaning, a dilution ratio of 1:4 onwards is suitable. Radiator descaling is accomplished with a 1:4 dilution with water.
The application area spans across hotels, hospitals, engineering industries, RMC companies, construction contractors, and more.

We have marked a distinct and dynamic position in the market by providing a high quality array of Boiler Water Treatment Chemical.

Benefits:

• AQL 300 is designed for use as an internal treatment for the prevention of scale and corrosion in steam boilers that have a high make-up water requirement
• Have low amounts of steam returned as condensate or are used as process boilers
• Nonvolatile
• 100% soluble in water
• Peptizing action aids in preventing sludge problems
• Causes precipitate to liquefy for easy blow down

Description:

• AQL 300 is a liquid blend of polyphosphates and polymeric dispersants
• Ingredients contained AQL 300 is in accordance with title 21, section 173.310, of the code of federal regulations for boiler water additives that may be safely used in the preparation of steam that will contact food. AQL 300 is authorized by the USDA for use in federally inspected meat and poultry plants

Application:

• AQL 300 has application in steam boilers in the operating pressure range of 300 p.s.i.g or less. It is recommended for use in systems having either softened or hard water makeup. The phosphate in AQL 300 will combine with the feed water calcium hardness to form a fluid sludge

Attention:

• Do not use in electrically heated steam boilers, as damage can result
• Authorized by the USDA for use in federally inspected meat and poultry plants
• Classification: G6

Product dosage:

• The initial dosage of AQL 300 is 1 gallon for each 400 gallons of boiler water (3000 ppm). Adjust the feed rate of the product to maintain a phosphate residual of 30 to 60 ppm as po₄ in the boiler

Method of feed:

• Feed AQL 300 immediately downstream of the feed water pump; alternate feed points are the feed water storage tank or condensate receiver. Ensure adequate mixing of the product and contact time in the feed water for oxygen removal.

System operating parameters:

• Boiler water ph: 10.5 to 12.0
• Total alkalinity: <1,000 ppm
• Hydrate alkalinity: 200 to 600 ppm
• Boiler water conductivity (neutralized): <4000 micro ohm
• Boiler water silica as sio₂: 150 ppm (theoretical) maximum
• Product control parameters: Orthophosphate: Orthophosphate

Physical properties:

• Appearance: colorless liquid
• Product ph: 7.0 – 8.0
• Specific gravity (73*f): 1.155
• Density: 9.6 lbs / gal

Warning:

• May cause skin irritation
• Causes eye irritation
• May be harmful if swallowed