Industrial Lubricant

DESCRIPTION SYHTH HTF-24 is a semi-synthetic superior quality heat transfer fluid is designed high boiling point for use in non-pressurized/low pressure, indirect heating systems. It delivers efficient, dependable, uniform process heat with no need for high pressures. SYHTH HTF-24 formulated from selected synthetic & mineral base oil stocks and additive system, that delivers outstanding performance and thermal stability with low vapour pressure, high thermal conductivity, oxidation stability and also provide reliable and consistent heat transfer performance over long period of service life. fluid offers excellent heat transfer properties over extended periods operating at continuously high operating temperatures. This oil has a relatively high flash point, low vapour pressure and low volatility. It is compatible with most of the mineral oils normally used in heat transfer systems.APPLICATIONS  SYHTH HTF-24 is recommended for heat transfer systems for industrial applications like non pressurized, indirectly heated, closed loop, liquid phase, chemical plants, process heating, food, feed, drink plants, textile plants, pharmaceuticals & processing industries heat transfer systems extended maximum use operating at bulk fluid temperatures up to 355°C. It is also suitable for applications where repeated heating and cooling cycles are involved.  SYHTH HTF-24 can be used in continuous heat transfer system with the following temperature limit for indirect heating in a closed system with forced circulation. 

DESCRIPTION GEARMAXX CLPF are modern high-performance series of gear oils containing high solid lubricant additive (Molybdenum Disulphide) based on especially selected synergetic base oil with special EP/AW additive showing excellent thermal stability, good ageing stability as well as extraordinary wear protecting properties. Furthermore, they are equipped with particular solid lubricants in order to achieve extremely high load-carrying capacities. The solid lubricant (Molybdenum Disulphide) package dampens vibration and noise. The solid lubricants show their effect especially in the event of heavy impact loads. Furthermore, the solid lubricant package can result in an increase in load-carrying capacity and contact area percentage of the tooth flank. GEARMAXX CLPF gear oils having remarkable properties results in a neutral behaviour and also compatible with non-ferrous heavy metals commonly used in seal materials. They also deliver a high thermal loading capacity, good ageing stability and excellent protection against corrosion. GEARMAXX CLPF series of gear oils fulfill the requirements of the DIN 51517-3 specification and qualify as 'CLPF type' gear oils in accordance with DIN 51502 requirements. APPLICATIONS  GEARMAXX CLPF series of gear oils are used in industrial gear boxes subject to slow running, heavy-duty gears with strong shock loads, vibrational loads and noise-dampening such as highly stressed, highly-loaded bearings, joints, pressing screws, bevel gears, planetary gears, spur gears, worm gears and spindles particularly when operating with low peripheral velocities and under shock load.  Application Industries – Metal Processing, Steels, Forging, Casting, Machinery equipment, Cement, Construction, Mining, Quarrying, Exploration, Power generation & Other industries  

(High Performance Semi-Synthetic Gear oil protection against micro pitting) DESCRIPTION: MPR GEARMAX high performance micropitting resistance synergetic gear oil offers the potential for improved lubrication of industrial gear / circulating developed for maximum protection of gears and bearings rolling mill equipments operating under normal to extremely heavy duty and heavy loaded gearboxes. Specially formulated with latest technology anti-micropitting additives in high quality synergetic (semi-synthetic) base oil stocks and a special “clean gear” additive technology such as synthetic (PAO) ester additive, special Mox-Active (Organo Molybdenum Complex) a German technology an improvement additive creates a passive film on friction surfaces before friction occurs, provides excellent protection against gear teeth from micro pitting optimum wear and an extremely low coefficient of friction even under extreme pressures, vibrations & heavy shock loads. It also contains extra anti-foam (silicon free defoamer) and excellent load carrying capacity, extreme pressure (EP), anti-foam additives, anti-oxidant, anti-rust & water demulsibility, oxidation stability, corrosion protection and increase long drain intervals to provide optimum equipment protection and oil life even under extreme conditions compare to normal EP gear oil to provide excellent protection against conventional wear modes such as scuffing but also provides a high level of resistance against micropitting fatigue. Furthermore, it provides quick moisture separation and optimal filterability. Micro pitting Micro pitting occurs under elastohydrodynamic lubrication (EHL) and will appear on the working surfaces of the gear. It is recognized as damaging to gear tooth accuracy, and in some cases, a primary failure mode. Micropitting begins as surface contact at high points on gear tooth surfaces, such as crests of undulations, peaks of cutter scallops, ridges of grinding lay and edges of grinding scratches where maximum peak-to-valley roughness of tooth surface may be about two to four mm. It may occur at edges of teeth and boundaries of surface defects, such as scratches and dents. It may also occur adjacent to damage from other failure modes such as micropitting or scuffing, and anywhere lubricant film is disrupted.

DESCRIPTION HYDRO AW & HLP Hydraulic Oils specially developed for applications subjected to wide range of temperature at high pressure or where small viscosity change with fluctuating temperature is required. Formulated with combination of highly refined quality paraffinic base oils Group 2 for AW, HLP a highly shear stable polymer and an advanced additive system to meet the stringent requirements of modern hydraulic systems. These oils offer good protection against wear, corrosion and rust formation. These oils prevent high foam building and ageing of the lubricants. Also when these lubricants are exposed to small amounts of water, this hardly influences the filterability of the lubricant. APPLICATIONS  Hydraulic and power transmission systems subjected to a wide range of ambient & operating.  Critical hydraulic systems such as high accuracy numerically controlled machine tools and those employing close clearance servo valves.  Hydraulic systems of Piling Rigs, TBN (Tunnel Boring Machine), Excavators, Cranes and Hydrostatic drives subjected to most severe outdoor operating conditions. BENEFITS  High viscosity index liquid paraffin, Enhanced anti-wear performance  Enhanced oxidation stability, Corrosion protection  Enhanced thermal stability, Demulsification performance  Air release performance, Filterability performance  Seal compatibility, Low foaming, extended equipment life.

DESCRIPTION:FG ALX HTXX-2 HD grease is designed for use in a variety of industrial applications for incidentalfood contact. These grease is formulated using nontoxic ingredients and food grade additiveswith high viscosity synthetic base oil combination of polymer with powerful balanced blend ofAluminum- Complex gives high protection by minimizing metal-to-metal contact and reducesfriction. It contains premium additives with small dosage of synthetic (PAO) ester additive,special white solid lubricants Mox-Active a German technology improvement friction modifieradditive which creates a passive film on friction surfaces before friction occurs, optimum wearprotection and an extremely low coefficient of friction even under extreme pressures, vibrationsunder high shock loads. These greases provide extended lubrication, increase equipment wearlife, reduce energy consumption, maintenance costs, downtime. Excellent flow and pump-abilityfor automatic centralized and Individualized systems. It is ideally suited for lubrication ofbearings operating under low to medium speeds under low to medium loads and exposed toextreme temperatures. All of this turn reduces maintenance cost and extend the life ofequipment and friction elements avoiding seizure & expensive repairs.FG ALX HTXX-2 HD Industrial Lubricant is extremely versatile, minimizing inventory requirementsand misapplication because it works in many different applications. It is especially effective insevere operations caused by moisture or high temperatures. Its robust Aluminum complexformulation seals out water and other contaminants that can wreak havoc on the long-term lifeof equipment. FG ALX HTXX-2 HD industrial lubricant protects against oxidation, rust andcorrosion, and its exceptional wear reduction has led LE customers worldwide to redefine“normal” or “expected” equipment life. With longer bearing life, fewer repairs, less downtimeand lower lubricant consumption, switching to FG ALX HTXX-2 HD has helped many companieslower their maintenance costs.APPLICATIONSFG ALX HTXX-2 HD greases are recommended for the lubrication of food and beverage processingmachinery operating under severe conditions such as Food Industries loaded gears & bearings,seamers, filling machines, Breweries, Pharmaceutical manufacturing machinery, Cold StorageUnits, Bearings, Chains, Slideway, Taps, Gearboxes, Joints Springs, Cams Rollers, Conveyors,Centralized lubrication systems.PROPRIETARY ADDITIVESProprietary additives are used exclusively in Powermaxx lubricants. FG ALX HTXX-2 HD greasecontains synthetic (PAO) ester additive, special white solid lubricants Mox-Active a Germantechnology improvement solid wear reducing additive is able to withstand extremely heavyloads, chemical attack and temperatures up to 1,038°C (1,900°F). It is attracted to metal surfaces,forming a microscopic layer but not building on itself or affecting clearances. Mox-Activeminimizes metal-to-metal contact and the resulting friction, heat and wear.Available Grades• NLGI: 2• NLGI: 1-1/2

ALPAZ-B2 is a heavy duty, high temperature lubricant that prevents galling, seizing and corrosion during assembly and assures easier disassembly. Also reduces wear in heavy pressure applications. The product contains an Organic/Inorganic soap, synergetic base oil refined blend of aluminum, copper and graphite lubricants that can be used on functions well with both small are large assemblies and slow moving parts. This has unique particle shapes suspended in a special carrier enhanced with the latest rust and corrosion inhibitors as well as extreme pressure additives, where low levels of Sulphur, chlorine and fluorine are required, especially where high temperatures may be experienced. It will protect metal parts under extreme heat, pressure, and contaminating conditions to 1095°C (2000°F). APPLICATION: (RECOMMENDED USES)  ALPAZ-B2 used in Spark plug threads installed into aluminum heads, Exhaust manifold and engine bolts, Anchor pins on brake assemblies, U-bolts and spring bolts, Lubricates and permits easy disassembly of assemblies exposed to high temperatures and heavy contact pressures, such as boiler and oven parts, jet engines, and industrial turbines, Hinges, gears, chain, sprockets and rollers  Recommended industry: Glass and foundry industry, Rail vehicle technology, Plant and machine (tool) engineering, Paper and packaging industry, Shipbuilding and marine technology, Logistics, Iron and steel industry, Rubber and plastic processing, Municipal services, Chemical industry.  

DESCRIPTION:ALCOM-2 Grease is a premium grade Aluminum complex thickener based grease manufactured using highquality petroleum base stocks. It contains a synergistic blend of high performance special additives. Apartfrom high drop point and excellent water resistance, the Aluminium complex thickener system attributesunique reversibility characteristics to the grease, which other soap and non-soap based greases cannotoffer. ALCOM-2 industrial grease protects against oxidation, rust and corrosion, and its exceptional wearreduction has led LE customers worldwide to redefine “normal” or “expected” equipment life. Withlonger bearing life, fewer repairs, less downtime and lower lubricant consumption, switching to ALCOM-2has helped many companies lower their maintenance costs.APPLICATIONSALCOM-2 greases are recommended for many applications where the grease needs max. water resistanceproperties under varying temperature circumstances in loaded gears & bearings, seamers, fillingmachines, Breweries, Pharmaceutical manufacturing machinery, Cold Storage Units, Bearings, Chains,Slideway, Taps, Gearboxes, Joints Springs, Cams Rollers, Conveyors, Centralized lubrication systems.FEATURES /BENEFITS (Beneficial Qualities)• Aluminium Complex thickener system provides the grease a very high drop point, hence a highoperating temperature. Good rust and corrosion protection and oxidation stability.• ALCOM-2 grease regains its original structure when the operating temperature goes up andsubsequently comes down, retains soft body and plasticity much longer than ordinary greases.• Good water and heat resistance and are not affected by mild acids / alkalis.• Thermally stable, can withstand high shock loads, and minimizing metal to metal contact.• Reduces friction, high protection against heat, seizure and wear, avoiding expensive repairs.• Requires less lubricant consumption, Immediate monetary savings• Provides extended service and bearings life and gives longer relubrication intervals.